Stainless steel carbon steel storage tanks generally store different chemical substances. Not only can they resist corrosion well, but they also have good performance because they are made of stainless steel. So what are the processing requirements for this equipment?

1, should comply with the specified standard requirements, and should be manufactured according to the drawing size requirements to avoid dimensional deviations.

2. After the welding is completed, the fasteners and connections must not be loose or have missing welds. If any, they should be dealt with in time. The weld seam must be full, and the outer welding surface must be smooth, without defects or problems such as slag inclusions, pores, and cracks. The welds of the tank liner need to be polished.

3, The flat bottom plate should be smooth, and the top manhole should be fully welded.

4, If there is an insulation layer, it should be firmly integrated with its surface. The material used for the insulation layer should be of good quality.

5,Stainless steel carbon steel storage tankAfter filling with water, there should be no water seepage or leakage, and no obvious deformation.

6, The protruding parts inside and outside the entrance hole should be flanged and other protective treatments to avoid hurting people.

When stainless steel carbon steel storage tanks need to be processed, you should pay attention to some shortcomings and avoid them as much as possible. At the same time, in terms of processing, you should also process them according to the requirements, choose appropriate processing methods, and improve the quality of the equipment.