Product overview
       The fermentation tank designed by our factory is a standard tank type. When the nominal volume of this tank type is within6M³The following tanks are jacketed. The cooling or heating of fermentation gas is completed by the jacket. The nominal volume is6M³In the above situation, the cooling of the fermentation gas is carried out by the vertical exhaust pipe, and we have made improvements in the connection of the exhaust pipe in the tank. This mainly avoids opening too many holes in the tank and creating dead corners. This continuous method achieves satisfactory results in actual use.
       Fermentation equipment tank types can be divided into two categories: one is a cone type for anaerobic fermentation (such as alcohol fermentation), and the other is a tank type for gas fermentation (such as standard type, Wu type, self-priming type, etc.). This type of equipment is most commonly used in standard tank types. The series of drawings and data of fermentation tanks designed by our factory belong to standard tank types. When designing fermentation equipment of various specifications, the design structure should be tight, with sufficient strength and service life. The equipment should have few internal accessories and a smooth surface. Pay attention to the need for good gas-steam contact and steam-solid mixing properties so that material transfer and gas exchange can be carried out effectively. There is sufficient heat exchange area to ensure that fermentation can be carried out at the most suitable temperature. Pay attention to the sealing performance of the equipment to ensure sterilization operations. 

Technical parameters