Stainless steel storage tanks are often used in the chemical industry. Together with some reaction equipment and many other chemical equipment, they are an important part of chemical production. The following is an introduction to the electrical part of the equipment. The electrical part is often important in this equipment.

1, the use of solid-state relay voltage regulation in the heating circuit simplifies the heating circuit, as long as the adjustment“voltage regulation” The heating power can be adjusted with the knob. At the same time, the control part of the heating circuit is equipped with an intelligent digital display, so that the heating temperature can be adjusted at will according to the requirements of the process, and the temperature control accuracy is high.

2,stainless steel storage tankThe controller should be placed flat on the operating platform, and the working environment should be strictly controlled so that the humidity is less than85,temperature10-40℃, there is no conductive dust or corrosive gas around.

3The electronic components of the stirring control circuit are all assembled on a circuit board. It adopts a double closed-loop control system, which has the characteristics of high speed regulation accuracy and stable rotation speed. It also has complete protection functions such as limiting overspeed and overcurrent, and adjusts“speed regulation” The knob can change the DC voltage of the DC motor, thereby changing the motor speed to control the stirring speed.

4. The controller shell adopts a standard aluminum alloy chassis, and the upper cover can be pulled out backwards for easy maintenance and inspection. The panel is equipped with a temperature digital display, voltmeter, tachometer, control switches and adjustment knobs for the operator to operate.

5, All external leads are led out from the rear panel through waterproof connectors and from the wiring terminals in the controller.

The electrical part of the stainless steel tank is more important for this equipment. In order to better understand the equipment before use, it can meet the needs of more users and increase the efficiency of equipment use. It also has an effect on extending service life.